null

AUO 55.06A53.006 T-Con Board

SKU:
sj-55.06A53.006
$7.03
(You save $1.04)
$5.99
$7.03
(You save $1.04)
$5.99
180-Day Warranty
We highly recommend matching your part number. Learn more
Part number can be found on the sticker.

IMPORTANT: Horizontal lines on the screen are virtually NEVER caused by a bad T-con board. Horizontal lines indicate a defective LCD panel (screen).



Known Models

BrandModelsVersions
ENVISIONL32W761
SANYODP32647
DP32648
TECOTA3296RV
VIOREV32NAFC
DIGITAL LIFESTYLESWT323
Part Number:
55.06A53.006
Warranty:
180-Day Warranty
Board Number:
T315XW02 V9 | T260XW02 VA | 06A53-1C
Harmonized Code:
8529.90.06.00
Manufacturer Part Number 1:
AUO 55.06A53.006
Notes:
ShopJimmy recommends ordering by part number whenever possible. Often times there are TV models that use more than one set of parts and/or panels.
Part Type:
T-Con
TV Panel Manufacturer:
AU Optronics
TV Sizes:
32
Models:
L32W761
Models:
DP32647
Models:
DP32648
Models:
TA3296RV
Models:
V32NAFC
Brands:
digital lifestyles
Models:
WT323
Panel Number:
T315XW02
Brands:
viore
Brands:
teco
Brands:
sanyo
Brands:
envision

Videos

What is a T-con board?

A T-con board — short for “timing control board” or “timing controller” — is found in LED and LCD TVs. This board converts the video signal from the main board and sends it directly to the screen to display the signal in the correct order and at the correct spot on the screen.

Which symptoms does a T-con board fix in a TV?

•  If your TV has no video, then the T-con board could be bad.

•  If your TV only has video on a fourth or half of the screen, then the T-con board could be bad.

*These are helpful tips to get you started and don’t represent accurate diagnoses for every TV model and failure. If you’re unsure of your diagnosis, we recommend checking out our YouTube channel or reaching out to a local TV technician for assistance.

How easy is it to replace a T-con board?

It's easy! Once you match the part number on your T-con board with the part number listed on this page to confirm compatibility, you’ll just need a screwdriver and the ability to remove the back of your TV and replace the board.