null

AUO 55.31T01.125 (05A09-1C) T-Con Board

SKU:
sj-55.31T01.125
$9.14
(You save $1.15)
$7.99
$9.14
(You save $1.15)
$7.99
180-Day Warranty
We highly recommend matching your part number. Learn more
Part number can be found on a sticker.

IMPORTANT: Horizontal lines on the screen are virtually NEVER caused by a bad T-con board. Horizontal lines indicate a defective LCD panel (screen).



Known Models

BrandModelsVersions
ELEMENTFLX-3211B
HAIERHLH326BB
POLAROIDFLM-3232
SCEPTREX32BV-NAGA
VIEWSONICN3260W
Part Number:
55.31T01.125
Warranty:
180-Day Warranty
Board Manufacturer:
AUO
Board Number:
05A09-1C|T315XW01_V5|T260XW02 V2
Harmonized Code:
8529.90.06.00
Notes:
ShopJimmy recommends ordering by part number whenever possible. Often times there are TV models that use more than one set of parts and/or panels.
Part Type:
T-Con
Part Usage:
LCD
TV Panel Manufacturer:
AU Optronics
TV Sizes:
32
Models:
FLX-3211B
Models:
HLH326BB
Models:
FLM-3232
Models:
X32BV-NAGA
Models:
N3260W
Panel Number:
T315XW01 V.5
Brands:
haier
Brands:
sceptre
Brands:
viewsonic
Brands:
element
Brands:
polaroid

Videos

What is a T-con board?

A T-con board — short for “timing control board” or “timing controller” — is found in LED and LCD TVs. This board converts the video signal from the main board and sends it directly to the screen to display the signal in the correct order and at the correct spot on the screen.

Which symptoms does a T-con board fix in a TV?

•  If your TV has no video, then the T-con board could be bad.

•  If your TV only has video on a fourth or half of the screen, then the T-con board could be bad.

*These are helpful tips to get you started and don’t represent accurate diagnoses for every TV model and failure. If you’re unsure of your diagnosis, we recommend checking out our YouTube channel or reaching out to a local TV technician for assistance.

How easy is it to replace a T-con board?

It's easy! Once you match the part number on your T-con board with the part number listed on this page to confirm compatibility, you’ll just need a screwdriver and the ability to remove the back of your TV and replace the board.