null

AUO 55.40T04.C04 (31T09-C0G) T-Con Board

SKU:
sj-55.40T04.C04
$17.09
(You save $8.46)
$8.63
$17.09
(You save $8.46)
$8.63
180-Day Warranty
Ships same business day if ordered before 4pm CT!
We highly recommend matching your part number. Learn more
Part number can be found on the sticker.

IMPORTANT: Horizontal lines on the screen are virtually NEVER caused by a bad T-con board. Horizontal lines indicate a defective LCD panel (screen).



Known Models

BrandModelsVersions
COBYTFTV4028
SHARPLC-40D68UT
SONYKDL-40EX400
WESTINGHOUSEVR-4085DFTW-61951-A040D
Warranty:
180-Day Warranty
Part Type:
T-Con
Part Usage:
LCD
TV Sizes:
40
Board Manufacturer:
AUO
TV Panel Manufacturer:
AU Optronics
Board Number:
31T09-C0G
Harmonized Code:
8529.90.06.00
Notes:
ShopJimmy recommends ordering by part number whenever possible. Often times there are TV models that use more than one set of parts and/or panels.
Models:
TFTV4028
Models:
LC-40D68UT
Models:
KDL-40EX400
Models:
VR-4085DF
Part Number:
55.40T04.C04
Brands:
sharp
Brands:
westinghouse
Brands:
sony
Brands:
coby
Panel Number:
T400HW03 V.0

Videos

What is a T-con board?

A T-con board — short for “timing control board” or “timing controller” — is found in LED and LCD TVs. This board converts the video signal from the main board and sends it directly to the screen to display the signal in the correct order and at the correct spot on the screen.

Which symptoms does a T-con board fix in a TV?

•  If your TV has no video, then the T-con board could be bad.

•  If your TV only has video on a fourth or half of the screen, then the T-con board could be bad.

*These are helpful tips to get you started and don’t represent accurate diagnoses for every TV model and failure. If you’re unsure of your diagnosis, we recommend checking out our YouTube channel or reaching out to a local TV technician for assistance.

How easy is it to replace a T-con board?

It's easy! Once you match the part number on your T-con board with the part number listed on this page to confirm compatibility, you’ll just need a screwdriver and the ability to remove the back of your TV and replace the board.