null

LG 6871L-2979A (6870C-0421A) T-Con Board 55LM4600 55LM6400 55LS4500 55LN5400

SKU:
sj-6871L-2979A
$31.20
(You save $6.21)
$24.99
$31.20
(You save $6.21)
$24.99
180-Day Warranty
Ships same business day if ordered before 4pm CT!
We highly recommend matching your part number. Learn more
Partial part number (2979A) can be found stamped on the board.

IMPORTANT: Horizontal lines on the screen are virtually NEVER caused by a bad T-con board. Horizontal lines indicate a defective LCD panel (screen).



Known Models

BrandModelsVersions
LG55LM4600-UCAUSZLHR, AUSZLUR
55LM6400-UA
55LN5100-UBBUSVLHR
55LN5200-UBBUSULJR
55LN5400-UABUSULJR
55LS4500-UDAUSZLHR, AUSZLUR
Models:
55LM6400-UA
Models:
55LN5200-UB
Part Type:
T-Con
Models:
55LN5400-UA
Part Usage:
LED/LCD
Models:
55LN5100-UB
Models:
55LM4600-UC
Models:
55LS4500-UD
TV Panel Manufacturer:
LG
TV Sizes:
55
Part Number:
6871L-2979A
Warranty:
180-Day Warranty
Board Manufacturer:
LG
Board Number:
6870C-0421A
Notes:
ShopJimmy recommends ordering by part number whenever possible. Often times there are TV models that use more than one set of parts and/or panels.
Panel Number:
LC550EUE-SER1
Brands:
lg

Videos

What is a T-con board?

A T-con board — short for “timing control board” or “timing controller” — is found in LED and LCD TVs. This board converts the video signal from the main board and sends it directly to the screen to display the signal in the correct order and at the correct spot on the screen.

Which symptoms does a T-con board fix in a TV?

•  If your TV has no video, then the T-con board could be bad.

•  If your TV only has video on a fourth or half of the screen, then the T-con board could be bad.

*These are helpful tips to get you started and don’t represent accurate diagnoses for every TV model and failure. If you’re unsure of your diagnosis, we recommend checking out our YouTube channel or reaching out to a local TV technician for assistance.

How easy is it to replace a T-con board?

It's easy! Once you match the part number on your T-con board with the part number listed on this page to confirm compatibility, you’ll just need a screwdriver and the ability to remove the back of your TV and replace the board.