null

Hitachi 756TXBCBZK012 Main Board for LE42S605 Loc. U405 EEPROM Only

SKU:
sj-EEPROM-756TXBCBZK012
$19.50
(You save $3.51)
$15.99
$19.50
(You save $3.51)
$15.99
No Warranty
Ships same business day if ordered before 4pm CT!
We highly recommend matching your part number. Learn more
Partial part number (TXBCBZK01201) can be found on the sticker.

PLEASE NOTE: The EEPROM you receive may appear different from the original, but is a compatible substitute.




IMPORTANT:

These main boards can have multiple failures, in addition to the EEPROM.

If EEPROM replacement does not repair your board, there are likely additional problems.



Symptoms EEPROM replacement MAY fix:

- On screen display is stuck on logo screen

- TV will not power on with remote or buttons (LED indicator remains same color)

- TV will not turn on after being off for 30+ minutes

- TV shuts off by itself during channel scan or when switching inputs

- TV turns on and is stuck in color test pattern mode forever

- TV turns on but there is no backlight (LED indicator shows TV is on but there is no image)

Known Models

BrandModelsVersions
HITACHILE42S605
Part Number:
EEPROM-756TXBCBZK012
Warranty:
No Warranty
Models:
LE42S605
Part Type:
Integrated Circuit
Brands:
hitachi

What is an IC?

IC stands for “integrated circuit” and it’s a set of electronic circuits on one small, flat piece (or “chip”) of semiconductor material, usually silicon. Large numbers of tiny MOSFETs (”metal-oxide-semiconductor field-effect transistors) integrate into the small chip.

Which symptoms does an IC fix in a TV?

•  Since a lot of symptoms could be the result of a failed or defective IC, please refer to any symptoms listed on this page or contact your local TV technician.

*These are helpful tips to get you started and don’t represent accurate diagnoses for every TV model and failure. If you’re unsure of your diagnosis, we recommend checking out our YouTube channel or reaching out to a local TV technician for assistance.

How easy is it to replace an IC?

You’ll need to have soldering experience to replace an IC on a board. If you don’t have that technical background, we suggest replacing the board instead.