ShopJimmy TV Repair & Share Success Stories


My TV had a very washed out picture and it looked like a negative. - Karl on September 20th, 2018

I googled the problem and found out it was most likely the T-Con board. Purchased the board and it fixed the problem.

Y Scan board replacement - Harry on September 20th, 2018

Purchased this board to replace the same board on an aging Samsung LJ92-01739C that had a burnt-out chip on the Y Scan board, causing no picture on boot-up. 15 minutes of effort to replace the Y Scan board, and the television set is again working!

  • TV Model: Other
  • TV Symptoms: No Picture

Philips UHP bulb replacement - Harry on September 20th, 2018

For anyone debating on whether to purchase a Generic VS an OEM bulb for their DLP TV, do yourself a favor and get a Philips UHP! White's are now WHITE, black's are now BLACK, and the brilliance is simply amazing! No more dull and washed-out colors.

Replaced the board. - Michael on September 19th, 2018

It took about 25 minutes to put the board in the TV and put all the wiring together. It took longer to get the channels back on the TV than to replace the board.

EEPROM replacement - Jim on September 18th, 2018

My SEIKI SE32HY10 stop turning on. I found the EEPROM listing had the trouble listed I had. I was a little fearful as I had never worked with a SMD before.. Cut the leads from the chip, used my smallest tip iron to remove the cut off legs. IT WORKED!

Thanks for the parts - Joylan on September 18th, 2018

I obtained the kit to repair my TV. I put in the main board and the totally power out TV started displaying a lit screen. I then put in the TCon board and I got signal. Was very relieved. Thanks ShopJimmy and the local repair guy for your support.

  • TV Model: Vizio D55U-D1
  • TV Symptoms: No Audio, No Picture, No Power

Easy Fix! - Alvin on September 17th, 2018

Following the youtube tutorial, I was easily able to replace the power and control boards on my 2 year old Samsung 55" LED set. I had lost power and HDMI port function. 45 minutes total time needed - quite simple.

  • TV Model: Other
  • TV Symptoms: Input Failure, No Power

Wife is overjoyed and it was easy - JOHN on September 17th, 2018

Found ShopJimmy via another TV repair site post, came here and found similar issues our TV was having. Ordered the replacement board, spent probably 20 minutes total replacing it and works like a charm. Wife is ecstatic and TV works great again!

67" DLP TV Better Than New! - Dan on September 17th, 2018

Nine years in, started to get the black dot/white dot issue with a failing DLP chip along with some burned in horizontal contrast blowing out on the screen. Replace the chip & voila, the TV is now better than new with fixed contrast, color & clarity!

Looks like new and saved me $800 to boot - Ralph on September 17th, 2018

Our Vizio e60-c3 was becoming difficult to see. After deciding to purchase a new television I decided there was nothing to lose by researching the issue. Found ShopJimmy and followed the YouTube video. Ordered the parts and fixed the backlights.

  • TV Model: Vizio E60-C3
  • TV Symptoms: Color Distortion, No Picture

multible vertical lines on screen - MICHAEL on September 17th, 2018

You Tubed problem, found related video, told of most likely repair by TAMPATEC. ordered T-Con board from Shop Jimmy, replaced T-Con board, beautiful picture! Thank You TAMPATEC, for the tip on repair. Thank You Shop Jimmy, for quality parts!!!

It Lives Again - Thomas on September 14th, 2018

One of my ham radio antennas took a direct lightning hit 2 weeks ago. It got into the house wiring via the ground rod and took out quite a few electronic devices, including our Vizio 48" LED 4K Ultra HD TV. $49.95 later, TV is fixed like new. Thanx J... Read More >

Replace bad board - Kenneth on September 13th, 2018

I searched the internet looking for issues for trouble shooting my tv. watched some videos and took my tv apart. I have never did anything like this before saw 2 bad capacitors board looked burnt so I replaced the board tv works great. I did it so ca... Read More >

Vizio TV fix - Janet on September 13th, 2018

Just saved ourselves having to buy a new tv. Apparently lightning destroyed our 3 year old vizio smart tv. Watched the video from ShopJimmy and ordered the complete repair kit. Parts were delivered very quickly ant kit contained all new boards and wi... Read More >

Another easy fix, thanks to ShopJimmy. - Greg on September 13th, 2018

I was given a 40" Samsung TV back in 2015 due to no power with the standby light lit. Purchased a replacement power board from ShopJimmy and problem solved. Same TV three years later, no power no standby light. Problem fixed again. Thank you.

First time! - Lisa on September 12th, 2018

My TV had a standby light but wouldn't turn on with the remote or sensor. I found repair videos from Shop Jimmy, looked doable for me (someone with zero electrical skills). I found the exact part for my power board and installed it myself!

Dots No More!!! - Cassandra on September 11th, 2018

I looked online and saw that I needed this part to fix all the dots that were appearing. My tv looks great and I didn't have to spend a ton. My daughter said "Now we don't have to watch tv and the stars at night!" Thanks for the part.

Panasonic Plasma won’t turn on - Don on September 11th, 2018

Got the parts, watched the video, installed the parts and it’s alive again!!

  • TV Model: Other
  • TV Symptoms: Blink Codes, No Power

60" Vizio tv. This is the 2nd part I've ordered from Jimmy's and both parts shipped fast. - George on September 11th, 2018

I had vertical lines on the tv. I googled the problem and I knew Jimmy's had what I needed for a good price.

Smart TV is smart again! - Robert on September 11th, 2018

TV didn't recognize any HDMI inputs and would take forever to get to the home screen flipping brightness levels all throughout the startup process. Full kit included power board, main board, and wifi module. All I needed was main. Success! Thanks SJ!

Items 41 to 60 of 3008 total