null

Sharp/Vizio 0981-0250-7706 (55.50T28.C03 55.50T283.C05) T-Con Board

SKU:
sj-0981-0250-7706
$27.99
$27.99
180-Day Warranty
We highly recommend matching your part number. Learn more
5550T28C03 or 5550T28C04 can be found on a sticker.

IMPORTANT: Horizontal lines on the screen are virtually NEVER caused by a bad T-con board. Horizontal lines indicate a defective LCD panel (screen).


Sharp/Vizio 0981-0250-7706 (55.50T28.C03) T-Con Board

Known Models

BrandModelsVersions
SHARPLC-50UB30U
VIZIOD50U-D1LTCWTQAS,LTCWTQDS,LTCWTQHS,LTMWTQAR,LTMWTQAS,LTMWTQDS,LTCWTQGS
E50U-D2LWZ2UGAS
M50-C1LTCWSPBR,LTMWSPBR
P50-C1LTMWTNAS
INSIGNIANS-50DR710NA17
Models:
M50-C1
Models:
P50-C1
Models:
E50U-D2
Part Number:
0981-0250-7706
Warranty:
180-Day Warranty
Board Manufacturer:
AUO
Comingle:
true
Models:
D50U-D1
Models:
LC-50UB30U
Notes:
ShopJimmy recommends ordering by part number whenever possible. Often times there are TV models that use more than one set of parts and/or panels.
Part Type:
T-Con
Part Usage:
LED/LCD
TV Panel Manufacturer:
AU Optronics
TV Sizes:
50
Brands:
vizio
Brands:
sharp
Brands:
insignia
Models:
NS-50DR710NA17
Panel Number:
T500QVN02.0
Board Number:
5550T28C03|43T03-C00|T430QVN01.0| 5550T28C05| 5550T28C04

Videos

What is a T-con board?

A T-con board — short for “timing control board” or “timing controller” — is found in LED and LCD TVs. This board converts the video signal from the main board and sends it directly to the screen to display the signal in the correct order and at the correct spot on the screen.

Which symptoms does a T-con board fix in a TV?

•  If your TV has no video, then the T-con board could be bad.

•  If your TV only has video on a fourth or half of the screen, then the T-con board could be bad.

*These are helpful tips to get you started and don’t represent accurate diagnoses for every TV model and failure. If you’re unsure of your diagnosis, we recommend checking out our YouTube channel or reaching out to a local TV technician for assistance.

How easy is it to replace a T-con board?

It's easy! Once you match the part number on your T-con board with the part number listed on this page to confirm compatibility, you’ll just need a screwdriver and the ability to remove the back of your TV and replace the board.