null

Samsung BN96-07270F (BN41-00990A) Assy Board P-power & IR

SKU:
sj-BN96-07270F
$25.78
(You save $5.79)
$19.99
$25.78
(You save $5.79)
$19.99
180-Day Warranty
We highly recommend matching your part number. Learn more
A07270F Is printed on the board.


Known Models

BrandModelsVersions
SAMSUNGLE32A557P2FXBTAA03,SQ01,SS02,0001
LE32A557P2FXRUAA03,0001,SS02,SQ01
LE32A557P2FXXCAA03,0001,SS02,SQ01
LE32A557P2FXXHAA03,SS02,SQ01
LE32A557P2FXXU0001,AA03,SQ01,SS02
LE32A559P4FXXC0001,AA03,SQ01,SS02
LE32A559P4FXXH0001,AA03,SQ01,SS02
LE32A559P4FXXU0001,AA03,SQ01,SS02
LE37A559P4FXXU0001,AA01,AA02,AA03
LN32A550P3FXZA
LN46A540P2FXZASS04,SS02,SQ03,SQ01,0001
LN46A550P3FXZA
Part Number:
BN96-07270F
Warranty:
180-Day Warranty
Board Number:
BN41-00990A|CT080204
Harmonized Code:
8529.90.06.00
Manufacturer Part Number 1:
Samsung BN96-07270F
Notes:
ShopJimmy recommends ordering by part number whenever possible. Often times there are TV models that use more than one set of parts and/or panels.
Part Rev Number:
V0.6
Part Type:
IR Sensor
TV Sizes:
46,32
Models:
LE32A557P2FXBT
Models:
LE32A557P2FXRU
Models:
LE32A557P2FXXC
Models:
LE32A557P2FXXH
Models:
LE32A557P2FXXU
Models:
LE32A559P4FXXC
Models:
LE32A559P4FXXH
Models:
LE32A559P4FXXU
Models:
LE37A559P4FXXU
Models:
LN32A550P3FXZA
Models:
LN46A540P2FXZA
Models:
LN46A550P3FXZA
Brands:
samsung

What is an IR sensor?

IR sensor is short for infrared sensor, and the sole purpose of the IR sensor is to receive the signal from your remote control and send it to the main board as an electronic signal.

Which symptoms does an IR sensor fix in a TV?

•  If your TV does not respond to any remote control functions (and you’ve already ruled out any potential issues with your remote), then your IR sensor is likely bad.

*These are helpful tips to get you started and don’t represent accurate diagnoses for every TV model and failure. If you’re unsure of your diagnosis, we recommend checking out our YouTube channel or reaching out to a local TV technician for assistance.

How easy is it to replace an IR sensor?

It's easy! Once you match the part number on your IR sensor with the part number listed on this page to confirm compatibility, you’ll just need a screwdriver and the ability to remove the back of your TV and replace the board.