Procedure
16022940 Rev. A
Control Board Instruction Sheet
AWARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death
or electrical shock.
1. Unplug refrigerator or disconnect power.
2. Replace control board.
NOTE: Technician must snap new board at break line utilizing proper ESD precautions.
The replacement control board is not programmed. The refrigerator will not operate without a code selected. It
is important to program the control board with the correct code. Product must be powered up to program. If no
code has been programmed the display will display 00 or flashing 00.
NOTE: The program code for this
refrigerator is located on the serial
plate on this unit after the word CODE.
Programming Mode:
ARTSNID HEADQUARTERS. NEWTON, IOWA LISTED HOUSEHOLD
FRIGERA
165A
MODEL Program Code 5.00 oz R1348
115VAC/60Hz
SIN AMPS 7.90
1. Open the fresh food door and hold the fresh food door light switch closed while pushing
the freezer temperature down key pad 3 times consecutively.
NOTE: The 3 key strokes must be done consecutively and within 10 seconds.
2. Release the fresh food door light switch.
3. The control will display PE to confirm entry
into the programming mode.
Freezer
P
Refrigerator
E
4. Entry is confirmed by pressing the
freezer down key once more.
5. The control will display no program code.
6. To set the desired program code number, press
the Freezer and Refrigerator UP
Freezer
?
Refrigerator
?
keys. The corresponding digit will be advanced with each key press.
7. Once the desired program code is displayed, press the Freezer DOWN key until the program code
begins flashing indicating it has been saved.
NOTE: If you attempt to enter an invalid program code the control will not save the code, but will flash code 00,
(The unit will NOT run with a program code of 00).
8. Once the program code has been saved the programming mode is exited by closing the refrigerator door(s).
NOTE: If you to enter a wrong program code the control can be reprogrammed by restarting the procedure
from the beginning.
Revitalize your Apple PowerMac G4 with the Apple 820-1173-A Motherboard, a high-quality component designed to ensure your system operates at peak performance. This "Like New" motherboard is the perfect replacement for your aging hardware, promising reliability and efficiency.
Key Specifications:
- Part Number: 820-1173-A
- Visible Numbers: 820-1173-A, 630T3523/630-3522
- Condition: Like New
- Ship Weight: 0.5 lbs
- Dimensions: 17x13x3 inches
Whether you're a tech enthusiast or a professional needing a dependable part for your PowerMac G4, this motherboard is an ideal choice. Trust in the quality and performance that Apple products are known for, and let ShopJimmy.com be your destination for this essential component. Embrace the opportunity to upgrade and enhance your computing experience with confidence.
16022940 Rev. A
Control Board Instruction Sheet
AWARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death
or electrical shock.
1. Unplug refrigerator or disconnect power.
2. Replace control board.
NOTE: Technician must snap new board at break line utilizing proper ESD precautions.
The replacement control board is not programmed. The refrigerator will not operate without a code selected. It
is important to program the control board with the correct code. Product must be powered up to program. If no
code has been programmed the display will display 00 or flashing 00.
NOTE: The program code for this
refrigerator is located on the serial
plate on this unit after the word CODE.
Programming Mode:
ARTSNID HEADQUARTERS. NEWTON, IOWA LISTED HOUSEHOLD
FRIGERA
165A
MODEL Program Code 5.00 oz R1348
115VAC/60Hz
SIN AMPS 7.90
1. Open the fresh food door and hold the fresh food door light switch closed while pushing
the freezer temperature down key pad 3 times consecutively.
NOTE: The 3 key strokes must be done consecutively and within 10 seconds.
2. Release the fresh food door light switch.
3. The control will display PE to confirm entry
into the programming mode.
Freezer
P
Refrigerator
E
4. Entry is confirmed by pressing the
freezer down key once more.
5. The control will display no program code.
6. To set the desired program code number, press
the Freezer and Refrigerator UP
Freezer
?
Refrigerator
?
keys. The corresponding digit will be advanced with each key press.
7. Once the desired program code is displayed, press the Freezer DOWN key until the program code
begins flashing indicating it has been saved.
NOTE: If you attempt to enter an invalid program code the control will not save the code, but will flash code 00,
(The unit will NOT run with a program code of 00).
8. Once the program code has been saved the programming mode is exited by closing the refrigerator door(s).
NOTE: If you to enter a wrong program code the control can be reprogrammed by restarting the procedure
from the beginning.
Revitalize your Apple PowerMac G4 with the Apple 820-1173-A Motherboard, a high-quality component designed to ensure your system operates at peak performance. This "Like New" motherboard is the perfect replacement for your aging hardware, promising reliability and efficiency.
Key Specifications:
- Part Number: 820-1173-A
- Visible Numbers: 820-1173-A, 630T3523/630-3522
- Condition: Like New
- Ship Weight: 0.5 lbs
- Dimensions: 17x13x3 inches
Whether you're a tech enthusiast or a professional needing a dependable part for your PowerMac G4, this motherboard is an ideal choice. Trust in the quality and performance that Apple products are known for, and let ShopJimmy.com be your destination for this essential component. Embrace the opportunity to upgrade and enhance your computing experience with confidence.