null

LG 6871L-2754B (6870C-0402C) T-Con Board

SKU:
sj-6871L-2754B
$24.00
(You save $5.01)
$18.99
$24.00
(You save $5.01)
$18.99
180-Day Warranty
We highly recommend matching your part number. Learn more
Partial part number (2754B) can be found stamped on the board.

IMPORTANT: Horizontal lines on the screen are virtually NEVER caused by a bad T-con board. Horizontal lines indicate a defective LCD panel (screen).



Known Models

BrandModelsVersions
PANASONICTC-L47E50
TC-L47ET5
Notes:
ShopJimmy recommends ordering by part number whenever possible. Often times there are TV models that use more than one set of parts and/or panels.
Part Number:
6871L-2754B
Warranty:
180-Day Warranty
Board Manufacturer:
LG DISPLAY CO., LTD
Board Number:
6870C-0402C
Part Type:
T-Con
Part Usage:
LED/LCD
TV Panel Manufacturer:
LG
TV Sizes:
47
Models:
TC-L47E50
Models:
TC-L47ET5
Additional Substitutes:
6871L-2836E 6871L-2836B 6871L-2754F 6871L-2754G 6871L-2836A 6871L-2944A 6871L-2944B 6871L-2836F 6871L-2754D 6871L-2842C 6871L-2944D 6871L-2842F 75030412
Panel Number:
LC470EUD-SEF2
Brands:
panasonic

Videos

What is a T-con board?

A T-con board — short for “timing control board” or “timing controller” — is found in LED and LCD TVs. This board converts the video signal from the main board and sends it directly to the screen to display the signal in the correct order and at the correct spot on the screen.

Which symptoms does a T-con board fix in a TV?

•  If your TV has no video, then the T-con board could be bad.

•  If your TV only has video on a fourth or half of the screen, then the T-con board could be bad.

*These are helpful tips to get you started and don’t represent accurate diagnoses for every TV model and failure. If you’re unsure of your diagnosis, we recommend checking out our YouTube channel or reaching out to a local TV technician for assistance.

How easy is it to replace a T-con board?

It's easy! Once you match the part number on your T-con board with the part number listed on this page to confirm compatibility, you’ll just need a screwdriver and the ability to remove the back of your TV and replace the board.