null

LG 6871L-2852G (6870C-0401B) T-Con Board 55LS4500 55LS4600

SKU:
sj-6871L-2852G
$39.00
(You save $8.01)
$30.99
$39.00
(You save $8.01)
$30.99
180-Day Warranty
Ships same business day if ordered before 4pm CT!
We highly recommend matching your part number. Learn more
Partial part number (2852G) can be found stamped on the board.

IMPORTANT: Horizontal lines on the screen are virtually NEVER caused by a bad T-con board. Horizontal lines indicate a defective LCD panel (screen).



Known Models

BrandModelsVersions
LG55LS4500-UDAUSWLHR, AUSWLUR
55LS4600-UAAUSWLHR
TV Sizes:
55
Models:
55LS4500-UD
Models:
55LS4600-UA
Part Number:
6871L-2852G
Warranty:
180-Day Warranty
Board Manufacturer:
LG DISPLAY CO., LTD
Board Number:
6870C-0401B
Notes:
ShopJimmy recommends ordering by part number whenever possible. Often times there are TV models that use more than one set of parts and/or panels.
Part Type:
T-Con
Part Usage:
LED/LCD
TV Panel Manufacturer:
LG
Panel Number:
LC550EUE-SEM1
Brands:
lg
Additional Substitutes:
6871L-2753M 6871L-2753R 6871L-2856C 6871L-2753S 6871L-2823H 6871L-2852D 6871L-2823E 6871L-2856B

Videos

What is a T-con board?

A T-con board — short for “timing control board” or “timing controller” — is found in LED and LCD TVs. This board converts the video signal from the main board and sends it directly to the screen to display the signal in the correct order and at the correct spot on the screen.

Which symptoms does a T-con board fix in a TV?

•  If your TV has no video, then the T-con board could be bad.

•  If your TV only has video on a fourth or half of the screen, then the T-con board could be bad.

*These are helpful tips to get you started and don’t represent accurate diagnoses for every TV model and failure. If you’re unsure of your diagnosis, we recommend checking out our YouTube channel or reaching out to a local TV technician for assistance.

How easy is it to replace a T-con board?

It's easy! Once you match the part number on your T-con board with the part number listed on this page to confirm compatibility, you’ll just need a screwdriver and the ability to remove the back of your TV and replace the board.