null

Philips EATDJ6E11 T-Con Board

SKU:
sj-EATDJ6E11
$24.70
(You save $8.71)
$15.99
$24.70
(You save $8.71)
$15.99
180-Day Warranty
Ships same business day if ordered before 4pm CT!
We highly recommend matching your part number. Learn more
EATDJ6E11 is found printed in rectangular box on white barcode sticker on board.

IMPORTANT: Horizontal lines on the screen are virtually NEVER caused by a bad T-con board. Horizontal lines indicate a defective LCD panel (screen).



Known Models

BrandModelsVersions
ELEMENTE4SFT5017K7C4M
E4SW5017RKU
HISENSE50H6D
PHILIPS50PFL5601/F7DS1,DS2
50PFL5601/F7ADS4
50PFL5601/F7BDS3
50PFL5602/F7 ADS2,DS5
50PFL5922/F7DS1
SHARPLC-50P7000U
WESTINGHOUSEWD50FB2530
Part Number:
EATDJ6E11
Warranty:
180-Day Warranty
Board Number:
EATDJ6E11
Part Type:
T-Con
Part Usage:
LED/LCD
Models:
E4SFT5017
Models:
E4SW5017RKU
Models:
50H6D
Models:
50PFL5601/F7
Models:
50PFL5601/F7A
Models:
50PFL5601/F7B
Models:
50PFL5602/F7 A
Models:
50PFL5922/F7
Models:
LC-50P7000U
Models:
WD50FB2530
Brands:
element
Brands:
hisense
Brands:
philips
Brands:
sharp
Brands:
westinghouse
Panel Number:
UAAU0XH

Videos

What is a T-con board?

A T-con board — short for “timing control board” or “timing controller” — is found in LED and LCD TVs. This board converts the video signal from the main board and sends it directly to the screen to display the signal in the correct order and at the correct spot on the screen.

Which symptoms does a T-con board fix in a TV?

•  If your TV has no video, then the T-con board could be bad.

•  If your TV only has video on a fourth or half of the screen, then the T-con board could be bad.

*These are helpful tips to get you started and don’t represent accurate diagnoses for every TV model and failure. If you’re unsure of your diagnosis, we recommend checking out our YouTube channel or reaching out to a local TV technician for assistance.

How easy is it to replace a T-con board?

It's easy! Once you match the part number on your T-con board with the part number listed on this page to confirm compatibility, you’ll just need a screwdriver and the ability to remove the back of your TV and replace the board.